Forefront UAG in 10 minutes

Posted by Ben Lee | Feb 21, 2010 | Training | 49 |

After playing around with Forefront UAG recently for work I thought it would be a good idea to create a quick 10 minute overview / training about how to install the product and setup a very basic publishing portal.

The video actually lasts 17 minutes despite its name as there was quite a lot of information to cram in but I figured no-one would mind! Another thing is that most of the time when I say “portal” I actually mean “trunk” which is the correct UAG term for a collection of published applications (unfortunately you cant “find and replace” in a voice recording that I know of!).

Items covered in the video are:

Topology
Installation
Basic HTTPS trunk
HTTP redirect trunk

Best viewed full screen

If you have watched any of my series of videos please leave me some feedback below, good or bad it doesn’t matter. Just so I know I’ve not been wasting my spare time! Thank you & enjoy. Also if there is anything in particular you would like covering in more detail drop me a note and I’ll see what I can do. Next time I was looking to do a ” Forefront TMG in 10 minutes” video.

49 Comments

Broni on February 22, 2010 at 12:25 am

Excellent overview of some of the features of UAG 🙂 I don’t seem to get the time to play with these things myself, so to have a quick rundown of key features presented in this easy to digest video is very useful! Keep up the good work!
Appa on February 27, 2010 at 3:06 pm

Great stuff man!!! Not even Microsoft has something like this.
Anonymous on March 20, 2010 at 11:29 am

I’ve seen UAG configuration video nowhere else before….great stuff..
ian0x0r on May 18, 2010 at 1:52 pm

Cool video, one thing though (through my own testing) is that you have to specify a FQDN for your trunk name otherwise you cant publish things like Exchange or Sharepoint. But you specified it on the video 🙂
DUDE on June 24, 2010 at 9:16 pm

Cheers man… you rock !!
aRBeex on August 18, 2010 at 5:26 pm

Awesome video man. Helped me get started!
Anonymous on August 28, 2010 at 9:57 pm

WOW! Great Video!!!! I love it and would love to see more!
The F5 Guy on September 1, 2010 at 4:50 pm

Excellent video! Thank you for taking the time to create a video like this and for sharing it with the community.
Senthil on September 30, 2010 at 1:47 pm

thanks..Excellent video..do some more
Clifton_Veal@hotmail.com on December 22, 2010 at 3:58 pm

Good Job HERE. Your service will save many administrators lots of time. I’m always reading and push or time. When I can review a video presentation, it helps to save configuration time and experimenting.
Anees Anjum on December 27, 2010 at 7:28 am

Thanks a lot buddy, that was really helpful!
Dave on January 6, 2011 at 11:29 am

Thanks for putting that together, was a good little intro!
ohad on January 10, 2011 at 9:06 pm

Hey,
just want to say thank you for the great overview about UAG,
i hope you will do another one and more advanced one.
Sam on January 18, 2011 at 8:48 am

Excellent, it is a great demo to learn from.
How about having further UAG related videos 🙂 ?
Jonathan Levert on February 3, 2011 at 6:15 pm

Excellent, it is a great demo to learn from.

I’m currently installing Forefront UAG in our envirronement.
Zeshan Samad Raja on February 11, 2011 at 3:36 pm

Excellent, really awesome video to learn UAG intro.
Alkalik on March 30, 2011 at 5:35 pm

Great video. I am hungry for more.
Shahram Javed on May 9, 2011 at 6:18 pm

Hi, i have some problem while installation of Unified Access Gateway,

When i press continue after Memory warning popup than i get a error popup:

“Unified Access Gateway can not installed on Domain Controller”

Can you help me in this issue,

Waiting for your positive response.

Kind Regards,

Shahram Javed
Cra5h0verr1de on June 4, 2011 at 9:54 am

Good video, with 1 question, when setting up the trunk in step 3, you selected to use local Active Directory, however when setting the base DN, the option changed by magic to define domain controllers. Did you need to change to this to set the base DN?
jeroen92 on June 7, 2011 at 8:32 am

Good video! Maked some things clear for me.
Naeem on June 7, 2011 at 7:31 pm

Very nice video. Thanks for posting it.
GeorgGG on June 21, 2011 at 9:27 pm

Thx

Very simple, very encouraging 😉
JeToO on June 23, 2011 at 10:49 am

Great video, simple and short, but efficient 🙂
Nice job
Infosec Warrior on July 26, 2011 at 2:23 am

Great job explaining FFUAG. Thanks
Santhosh Kumar on July 26, 2011 at 4:57 pm

Very useful video tutorial.

Thanks
Wolfgang DForefront Unified Access Gateway on August 15, 2011 at 12:25 pm

Excellent video, perfect to have a short overview on the UAG
Thanks a lot
Pawel/Poland on August 24, 2011 at 3:23 pm

Fantastic video !!! I’m impressed how quick and clear introduction to UAG is it. Thanks a lot !
Gennan on October 14, 2011 at 5:54 pm

Helo Ben

Excellent work. Any chans to explain other features with UAG?

Thanks
Omar on October 16, 2011 at 1:57 pm

Very useful. Enabled me to see and understand it in less than 15 minutes. Thank you!
Dagfinn on October 17, 2011 at 6:44 am

Thanks.
Informative and good introduction to UAG. Really gives a basic understanding of the product bookmark will be added.
Ramanachary on December 14, 2011 at 5:48 pm

Excellent overview of some of the features of UAG.I’m impressed how quick and clear introduction to UAG is it. Thanks a lot !
SWJV on December 20, 2011 at 2:45 am

Great video – many thanks for taking the time!
GA on January 17, 2012 at 3:57 pm

Very cool, trying to come up to speed for different ways to publish portions of SharePoint 2010 QUICKLY. This is enough to at least get me started to see if it will work in time for project rollout…. in a couple of weeks!
JDean on February 10, 2012 at 9:19 pm

Thank you for taking the time to do this, and for sharing it with the world!
Dino on April 2, 2012 at 8:54 am

Very Quick and explained video,that’s what i was looking for
Tanveer Khan on April 10, 2012 at 4:13 pm

Excellent!! A good and quick start point.. Thas=ks for sharing..:-)
Zulfi on April 16, 2012 at 6:09 am

Great Video ….Thanks for posting this

Thanks
Zulfi
Kunal on April 17, 2012 at 10:36 pm

Short, Nice and Informative.
Anonymous on April 27, 2012 at 2:24 am

Very good video. Got lot of information about UAG. Thanks a lot for sharing this.
Sanjiv Sharma on May 8, 2012 at 6:36 pm

This is gr8 video.. Thx for putting time and sharing this.
Ron on May 11, 2012 at 6:32 pm

Very useful video. Thanks for taking the time to make it. I’m gong to watch it again and set up a test UAG environment.
Ron
happycamper on June 7, 2012 at 2:32 pm

thank you so much for this video it was fantastic go me to install my own Test UAG it really does what is says on the tin.

thank you again.
Lazermn03 on June 28, 2012 at 7:08 pm

Nice vid. Almost too quick, but good overview.
Fal on July 12, 2012 at 8:25 am

Great overview video of the process involve and resulting portal. Thanks for putting in the time to create & share it.
System Center Sultan on November 2, 2012 at 6:09 pm

Wow,

That was the bomb video, mate. Like a perfect day at the beach with the waves just right.

Thanks a lot…
Anonymous on December 21, 2012 at 1:24 pm

Well done. Thanks for the quick and concise rundown of UAG.
Ike on May 2, 2013 at 3:22 am

Excellent overview! Having to give myself a crash course in UAG for work right now and this was a great start.
xinger on June 27, 2013 at 10:30 pm

Wow. I learned way more in 17 minutes than I did/would have on technet for the afternoon. No worries that the video ran long. I watched every second. Thank you!
Kapil on November 10, 2013 at 3:12 am

Excellent, keep up the good work!